What is the reliable source to pass Cisco 600-460 dumps securing maximum marks? The Implementing and Supporting Cisco Unified Contact Center Enterprise (600-460 UCCEIS) exam is a 75 minutes (65-75 questions) assessment in pass4itsure that is associated with the Cisco Unified Contact Center Enterprise Specialist certification. Most popular Cisco 600-460 dumps exam 2018 is the best way to success with 100% pass rate video training. “Implementing and Supporting Cisco Unified Contact Center Enterprise” is the exam name of Pass4itsure Cisco 600-460 dumps test which designed to help candidates prepare for and pass the Cisco 600-460 exam.
If you are a Administering Cisco Unified Contact Center Enterprise exam candidate and have been looking for a way to stand out and make the employers believe that you are different and better than other Cisco Unified Contact Center Enterprise Specialist experts, then you must get the UCCEIS https://www.pass4itsure.com/600-460.html dumps exam questions and pass it by working hard.
[2018-NEW Pass4itsure 600-460 Dumps From Google Drive]: https://drive.google.com/open?id=1pEiAvxRb1laOmdnq2XhaHuJld4RIZJZ-
[2018-NEW Pass4itsure 300-320 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWck1GZWpsWHY4ZU0
Pass4itsure Latest and Most Accurate Cisco 600-460 Dumps Exam Q&As:
QUESTION 23
In the Cisco Unified Contact Center Enterprise with Cisco Unified CVP, which two statements about how to increase the Cisco Unified CVP availability are true? (Choose two.)
A. Must have SIP Proxy server to pass messages between the gateways and the Cisco Unified CVP servers.
B. Must have voice gateway TCL scripts to handle conditions where the gateways cannot contact the Cisco Unified CVP Call Server to direct the call correctly.
C. Add load balancers to load balance .wav file requests across multiple Cisco Unified CVP Media Servers.
D. Dedicate duplexed VRU peripheral gateways for each Cisco Unified CVP call server.
E. For a single data center with centralized deployment, deploy Cisco Unified CVP with N:N redundancy.
600-460 exam Correct Answer: BC
QUESTION 24
In the Cisco Contact Center Enterprise solution, which process is responsible for peer-to-peer synchronization?
A. ccagent
B. mds
C. router
D. opc
Correct Answer: B
QUESTION 25
What is the semantic meaning of the RouterCallKeyDay variable?
A. It represents a number that corresponds to the day that the call was taken. For example: at midnight it could increment from 151191 to 151192.
B. It represents a string that corresponds to the day that the call was taken. For example: at midnight it could advance from “Monday” to “Tuesday”.
C. It represents a number that uniquely identifies the call during the day it was taken. For example: at midnight it would reset to zero.
D. It represents a sequence number used for ordering rows for the same call.
E. It represents a string that corresponds to a Globally Unique Call Identifier.
600-460 dumps Correct Answer: A
QUESTION 26
Cisco Unified Contact Center Enterprise is deployed with Cisco Finesse and you make changes to CTI Server, Contact Center Enterprise Administration, or cluster settings. Which service must be restarted for changes to take effect?
A. Cluster Manager
B. System Application Agent
C. Cisco DB
D. Cisco Tomcat
E. Cisco Dirsync
Correct Answer: D
QUESTION 27
Within Cisco Unified ICM, which process handles communication between the router and peripheral gateway components?
A. dbagent
B. opcs
C. ccagent
D. mds
600-460 pdf Correct Answer: C
QUESTION 28
Which option about the ICM heartbeat interval and maximum number of missed heartbeats allowed between duplexed sides over the private network is true?
A. 100 ms, 3 heartbeats
B. 100 ms, 5 heartbeats
C. 400 ms, 3 heartbeats
D. 400 ms, 5 heartbeats
E. The heartbeat interval and maximum missed heartbeats settings can be customized by a system administrator
Correct Answer: B
QUESTION 29
You are about to perform a Tech Refresh upgrade for a customer. The customer wants more details about how the historical data is maintained. The customer has two sides each with a router, logger, and HDS DDS. Which is the best explanation?
A. The loggers exchange historical data to keep themselves up to date and each logger keeps its local HDS-DDS up to date.
B. The routers exchange historical data to keep themselves up to date and each router keeps its local HDS-DDS up to date.
C. The HDS-DDSs continuously synchronized the historical data to keep themselves up to date.
D. Each side synchronized its data from the logger using SQL replication.
600-460 vce Correct Answer: A
QUESTION 30
When performing an upgrade to Cisco Unified Contact Center Enterprise solution, which components do not need to be upgraded together during the same maintenance window?
A. Cisco Unified ICM call router and logger
B. Cisco Unified ICM call router and administrative workstation
C. Cisco Unified ICM call router and peripheral gateway
D. administrative workstation and HDS-DDS
Correct Answer: C
QUESTION 31
In the Cisco Unified Contact Center Enterprise solution, if the private network fails but the visible network is still operational, which statement is true?
A. The system stops routing calls because it cannot function without a private network.
B. The private network data is rerouted automatically over the visible network.
C. Both call routers go active and attempt to split the system until the private network is restored.
D. The system continues to operate but with only one call router in simplex mode.
600-460 exam Correct Answer: D
QUESTION 32
Which two things can cause the “Send to VRU” to fail within an ICM script for Cisco Unified Customer Voice Portal? (Choose two.)
A. No network VRU is configured for the routing client.
B. VRU PIM just got out of service.
C. Incorrect media file name.
D. Send to originator is not enabled.
E. Primary VRU peripheral gateway is out of service.
Correct Answer: AB
QUESTION 33
A client application creates an HDFS file named foo.txt with a replication factor of 3. Identify which best describes the file access rules in HDFS if the file has a single block that is stored on data nodes A, B and C?
A. The file will be marked as corrupted if data node B fails during the creation of the file.
B. Each data node locks the local file to prohibit concurrent readers and writers of the file.
C. Each data node stores a copy of the file in the local file system with the same name as the HDFS file.
D. The file can be accessed if at least one of the data nodes storing the file is available.
600-460 dumps Correct Answer: D
QUESTION 34
In a MapReduce job, you want each of your input files processed by a single map task. How do you configure a MapReduce job so that a single map task processes each input file regardless of how many blocks the input file occupies?
A. Increase the parameter that controls minimum split size in the job configuration.
B. Write a custom MapRunner that iterates over all key-value pairs in the entire file.
C. Set the number of mappers equal to the number of input files you want to process.
D. Write a custom FileInputFormat and override the method isSplitable to always return false.
Correct Answer: D
QUESTION 35
Which process describes the lifecycle of a Mapper?
A. The JobTracker calls the TaskTracker s configure () method, then its map () method and finally its close () method.
B. The TaskTracker spawns a new Mapper to process all records in a single input split.
C. The TaskTracker spawns a new Mapper to process each key-value pair.
D. The JobTracker spawns a new Mapper to process all records in a single file.
600-460 pdf Correct Answer: C
QUESTION 36
Determine which best describes when the reduce method is first called in a MapReduce job?
A. Reducers start copying intermediate key-value pairs from each Mapper as soon as it has completed.The programmer can configure in the job what percentage of the intermediate data should arrive before the reduce method begins.
B. Reducers start copying intermediate key-value pairs from each Mapper as soon as it has completed.The reduce method is called only after all intermediate data has been copied and sorted.
C. Reduce methods and map methods all start at the beginning of a job, in order to provide optimal performance for map-only or reduce-only jobs.
D. Reducers start copying intermediate key-value pairs from each Mapper as soon as it has completed.The reduce method is called as soon as the intermediate key-value pairs start to arrive.
Correct Answer: D
QUESTION 37
You have written a Mapper which invokes the following five calls to the OutputColletor.collect method: output.collect (new Text ( Apple ), new Text ( Red ) ) ; output.collect (new Text ( Banana ), new Text ( Yellow ) ) ; output.collect (new Text ( Apple ), new Text ( Yellow ) ) ; output.collect (new Text ( Cherry ), new Text ( Red ) ) ; output.collect (new Text ( Apple ), new Text ( Green ) ) ; How many times will the Reducer s reduce method be invoked?
A. 6
B. 3
C. 1
D. 0
E. 5
600-460 vce Correct Answer: B
QUESTION 38
To process input key-value pairs, your mapper needs to lead a 512 MB data file in memory. What is the best way to accomplish this?
A. Serialize the data file, insert in it the JobConf object, and read the data into memory in the configure method of the mapper.
B. Place the data file in the DistributedCache and read the data into memory in the map method of the mapper.
C. Place the data file in the DataCache and read the data into memory in the configure method of the mapper.
D. Place the data file in the DistributedCache and read the data into memory in the configure method of the mapper.
Correct Answer: B
QUESTION 39
In a MapReduce job, the reducer receives all values associated with same key. Which statement best describes the ordering of these values?
A. The values are in sorted order.
B. The values are arbitrarily ordered, and the ordering may vary from run to run of the same MapReduce job.
C. The values are arbitrary ordered, but multiple runs of the same MapReduce job will always have the same ordering.
D. Since the values come from mapper outputs, the reducers will receive contiguous sections of sorted values.
600-460 exam Correct Answer: B
QUESTION NO: 40
An associated STA detects a new BSS with the same SSID as the STA’s current BSS. The new BSS uses a different IP subnet than the current BSS. If the STA is configured to use 802.1X/EAP preauthentication, what is likely to occur?
A. The STA will not attempt to preauthenticate because the new BSS uses a different IP subnet.
B. The STA will attempt to preauthenticate, but fail because the new BSS uses a different data-link broadcast domain.
C. The STA will attempt to preauthenticate and succeed if DHCP is supported on the new subnet.
D. The STA will attempt to preauthenticate and succeed if IP Mobility is enabled on the AP or WLAN controller.
E. The STA will attempt to preauthenticate and succeed if the current AP has shared its cached PMK.
Answer: B
Explanation:
QUESTION NO: 41
Given: A WLAN controller is connected to ABC Company’s core layer 3 Ethernet switch with an IEEE 802.1Q trunk connection. The WLAN controller’s native VLAN is VLAN 6 and its IP address is 10.0.14.2 /24. Lightweight APs supporting centralized forwarding are connected to the network on VLANs 7, 8, and 9, and they each build a layer 3 tunnel back to the WLAN controller’s IP address. The dynamically assigned IP addresses received by each AP from a DHCP server will be.
A. Associated with the VLAN on which they are connected.
B. Associated with the native VLAN of the WLAN controller.
C. Associated with VLAN 1, the default VLAN for new APs
D. Associated with a non-routable VLAN until the MAC address of the AP is removed from the controller’s MAC filter
600-460 dumps Answer: A
Explanation:
QUESTION NO: 42
What is the purpose of DHCP Option 43, and how is it used with WLANs?
A. It provides clients with a temporary IP address on a restricted VLAN until 802.1X authentication is completed. Then the client receives its long-term IP address.
B. It provides IP address bindings for specific network nodes that require long-term IP address assignments. WLAN controllers are configured to use Option 43 to receive long-term IP address leases that are centrally managed with DHCP.
C. It supports vendor-specific IP address attributes for node discovery purposes. APs use Option 43 with vendor class identifiers to obtain the IP address of a centralized WLAN controller.
D. It integrates a DHCP server with AAA servers and user databases to dynamically assign IP addresses to client devices. During 802.1X, the AAA server uses Option 43 to notify the DHCP server what IP pool the client’s address should be drawn from.
Answer: C
Explanation:
Administering Cisco Unified Contact Center Enterprise exam students want to spend their time to find valid Cisco UCCEIS 600-460 dumps pdf and for that, it is important for them to have a new 600-460 questions pdf 2018.”Implementing and Supporting Cisco Unified Contact Center Enterprise”, also known as 600-460 exam, is a Cisco certification which covers all the knowledge points of the real Cisco exam. Pass4itsure Cisco 600-460 dumps exam questions answers are updated (70 Q&As) are verified by experts. The associated certifications of 600-460 dumps is Cisco Unified Contact Center Enterprise Specialist. There is a lot of scope in the Cisco Cisco Unified Contact Center Enterprise Specialist certification exams but due to many people taking interest in Cisco https://www.pass4itsure.com/600-460.html dumps new questions 2018, getting a good job has become an issue for some Administering Cisco Unified Contact Center Enterprise experts.
