Real and effective Cisco CCNP Wireless 300-360 exam dumps and 300-360 pdf online download

Where do I find a 300-360 PDF or any dump to download? Here you can easily get the latest Cisco CCNP Wireless 300-360 exam dumps and 300-360 pdf! We’ve compiled the latest Cisco 300-360 exam questions and answers to help you save most of your time. Cisco 300-360 exam “Designing Cisco Wireless Enterprise Networks” (Q&As:209). All exam dump! Guaranteed to pass for the first time!

Watch the Cisco CCNP Wireless 300-360 video tutorial online

Cisco CCNP Wireless 300-360 Exam pdf

[PDF] Free Cisco 300-360 pdf dumps download from Google Drive:

Related Cisco CCNP Wireless Exam pdf

Cisco exam certification information

300-360 WIDESIGN – Cisco:

Cisco CCNP Wireless 300-360 Online Exam Practice Questions

Which two options describe best practices that must be completed after a wireless installation is finished? (Choose
A. Make sure that there are no spaces between the devices on the rack that the Wireless Lan Controller is installed.
B. Consult with the customer to ensure that the IT staff has a complete set of design and installation documents.
C. Make sure the customer is aware that they should consider purchasing a support contract immediately after the
installation is complete.
D. Spend time with the customer to show them the controller GUI and inform them how they can reach the Cisco TAC if
they have any problems.
E. Test all the customer\\’s wireless devices and applications to ensure they are working properly.
Correct Answer: BE


An engineer is deploying an outdoor Mesh network. Which four major factors should be considered? (Choose four.)
A. power
B. buildings
C. traffic lights
D. satellite dishes
E. line of sight
F. network connectivity
G. power lines
H. mounting
Correct Answer: ABEH


An engineer is installing a wireless network in an industrial area with extreme temperatures and a significant amount of
dust. Which enclosure should be used to protect the APs?
Correct Answer: C
Sometimes access points (APs) are located in areas where they are subject to extreme moisture, temperatures, dust
and particles. These APs might need to be mounted inside a sealed enclosure. The NEMA has a rating system for these
enclosures, which are generally called NEMA enclosures. Reference:


A customer has deployed an N+N redundant wireless infrastructure. In this deployment, the access points have been
salt and peppered between controllers. What configuration would be necessary to cut down on the use of mobility
tunnels for voice clients?
A. mobility anchor
B. KIS based CAC
C. media session snooping
D. re-anchor roamed voice clients
Correct Answer: D


When a post-installation audit is performed using the Ekahau Survey tool, which two steps are associated with the
passive portion of the audit? (Choose two.)
A. Check to see if the signal levels on other access points that are heard on the same channel are at least 19 dBm
weaker than the access point that you are next to
B. Survey by SSID to ensure that smooth roaming is taking place
C. Verify that the real-world network traffic (for example, physical data rate, packet loss, etc.) meets user requirements
D. When you have completed the post-installation surveys, compare them to the surveys that were performed before
the installation. They should look nearly identical
E. Verify that user applications are running smoothly over the wireless network
Correct Answer: AD


The wireless team must configure a new voice SSID for optimized roaming across multiple WLCs with Cisco 7925
phones. Which two WLC settings accomplish this goal? (Choose two.)
A. Configure AVC profiles on the SSID
B. Configure mobility groups between WLCs
C. Use AVC to tag traffic voice traffic as best effort
D. Use Cisco Centralized Key Management for authentication
E. Configure AP groups between WLCs
Correct Answer: BD


An engineer would like to calibrate the RF environment to improve accuracy. Which wireless attribute is added to the
floor-level calculation by calibrating the floor?
A. attenuation
B. TX power
C. multipath
Correct Answer: A


You are designing a wireless mesh network for an oil refinery. What is the Cisco-recommended model of a Cisco
Aironet 1550 Series Outdoor Access Point for this location?
A. 1552I
B. 1552CU
C. 1552E D. 1552H
Correct Answer: D
Cisco Aironet 1552H Access Point This ruggedized, outdoor, 802.11n access point is suitable for generic hazardous
environments, and does not require a wireless sensor network.


A network engineer wants the DSCP marking to align with the 802.11e access category video. What will this marking
A. 34
B. AF31
C. 4
D. 5
Correct Answer: A


An engineer is configuring a new VoWLAN and wants only IEEE 802.11g/n to be supported. Which two data rates
should be configured? (Choose two.)
A. 18 Mbps and higher should be supported.
B. Lower than 24 Mbps should be supported.
C. Lower than 24 Mbps should be supported.
D. 1, 2, 5.5, and 11 Mbps should be disabled.
E. 11 Mbps should be mandatory.
F. 6 and 9 Mbps should be supported
G. 12 Mbps should be mandatory.
Correct Answer: AG


You must create a simple implementation of QoS on a WIAN. The implementation must allow clients to prioritize traffic
into these four classes:
voice video best effort background
Which option do you enable?
B. NetFlow v9
D. Cisco AVC
Correct Answer: C
WMM Classification WMM uses the 802.1P classification scheme (part of the IEEE 802.1D MAC Bridges standard).
This classification scheme has eight priorities that WMM maps to four access categories with WMM designations:
AC_BK–Background AC_BE–Best effort AC_VI–Video AC_VO–Voice


What two factors could cause a post-deployment audit to show a high retransmission rate for the WLAN? (Choose two.)
A. CRC errors
B. Rate shifting
C. CCX compatible clients
D. High SNR values
E. High RSSI values
Correct Answer: AB


A customer is having issues streaming video over wireless in a few high-density areas of their campus. After further
investigation, the administrator has singled out the issue pertains to the clients associated to 802.11b/g only access
points. The rest of the campus is covered in 802.11n access points. What is a possible reason for the issue with video
streaming on the 802.11b/g access points as opposed to the 802.11n access points?
A. Due to the High-Density environment, there was high-utilization of the wireless spectrum. With 802.11n. the access
points are able to aggregate the MSDU and MPDU frames into A-MSDU and A-MPDU frames, utilizing less airtime to
transfer data.
B. The wireless clients were all transmitting at 802.11b data rates and would have operated properly had they been
transmitting and receiving at 802.11g rates.
C. The clients could not transmit data at the highest mandatory rate of 54 Mbps due to limitations with 802.11b/g. This
data-rate is only possible when transmitting at 802.11n speeds.
D. The wireless controller was denying the client access to the video due to multicast-direct supporting the PHY rate of
48000 that the 802.11b/g client could not handle.
Correct Answer: A

Share Pass4itsure discount codes for free

pass4itsure coupon

The benefits of Pass4itsure!

Pass4itsure offers the latest exam practice questions and answers free of charge! Update all exam questions throughout the year,
with a number of professional exam experts! To make sure it works! Maximum pass rate, best value for money! Helps you pass the exam easily on your first attempt.

why pass4itsure

This maybe you’re interested


Get the full Cisco CCNP Wireless 300-360 exam dump here: (Q&As:209). Follow my blog and we regularly update the latest effective exam dumps to help you improve your skills!