Download Cisco 642-052 Practice Tests Cisco 642-052 Practice Test Easily – Popular Exams


Ensure that you are provided with only the best and most updated Cisco 642-052 Certification training materials, we also want you to be able to access Cisco 642-052 easily, whenever you want.We provide all our Cisco 642-052 Certification exam training material in PDF format, which is a very common format found in all computers and gadgets. Now we add the latest Cisco 642-052 content and to print and share content.

You are configuring a VLAN interface on an internal route processor. You defined the VLAN interface. What should you do next?
A. define the network number
B. define the default gateway
C. assign IP routing to the interface
D. assign a unique IP address to the interface

Correct Answer: D QUESTION 2
You *********- route command to configure a default route on which platform?
A. Catalyst 2900
B. Catalyst 3500XL
C. Catalyst ********
D. Catalyst ********

Correct Answer: C QUESTION 3
You have a Catalyst 5000 switch with a large *** network. Broadcasts are consuming too much bandwidth.
You want to create VLANs and need inter VLAN communication.
Which hardware accomplishes **?

D. VLAN interswitch

Correct Answer: B QUESTION 4
Which device allows communication between VLANs?
A. IP translator
B. route processor
C. switching engine
D. VLAN interswitch

Correct Answer: B QUESTION 5
A VLAN, implemented in switching equipment, corresponds to which concept in legacy network equipment?
A. VTP domain
B. LAN segment
C. routed network
D. ISL trunk interface
E. spanning *****

Correct Answer: B QUESTION 6
Which statements are true above VLANs? (Choose two.)
A. **** have connected members located anywhere in the switched network.
B. VLANs improve network segmentation by determining the next network point to which a frame should be forwarded.
C. VLANs allow a Layer 1 protocoll to determine intelligently the best path to a destination when multiple paths exist.
D. VLANs solve the scalability problems found in large, flat networks by dividing the network into smaller broadcast domains or subnets.

Correct Answer: AD QUESTION 7
How many VLANs can s single RSM support?
A. 1
B. 16
C. 256
D. 1024

Correct Answer: C QUESTION 8
Which command configures a ***- gateway on a Catalyst 3500XL switch?
A. Switch(config) ip route ip address
B. Switch(config) set ip route address
C. Switch(config) ip route-default-gateway ip address
D. Switch(enable) set default-gateway ip address

Correct Answer: D QUESTION 9
What is a reason for aerating VLANs on switches?
A. to simply management
B. to simple configuration
C. to enhance Layer 2 functionality
D. to create smaller broadcast domains

Correct Answer: D QUESTION 10
Which command defines a VLAN on an RSM in a **** switch
A. vlan vlan-number
B. RSM vlan vlan-number on
C. Set vlan vlan-number on
D. Interface vlan vlan-number

Correct Answer: D QUESTION 11
Which router command is used to reverse telnet to a modem locally connected to line 8?
A. telnet 1008
B. telnet 2008
C. telnet 8
D. telnet 8

Correct Answer: B
You have a large flat network that is experiencing congestion. You want to create VLANs with smaller
subnet ***** Layer 2 switch to increase performance. You only router is equipped with 10BaseT Ethernet
How can you accomplish the assigned task?

A. use separate physical links from the router to the switch for each VLAN
B. move each new subnet to a separate router interface and route all traffic
C. enable ISL trunking on the router and pass all VLAN traffic on a single link
D. enable 802.1Q trunking on the router to pass all VLAN traffic on a single link
Correct Answer: A
What is a VLAN?
A. a routed internetwork
B. a single broadcast domain
C. a group of switch ports that communicate through an RSM
D. a group of switch ports that are member of the same multicast group
Correct Answer: B
When building an IP multicast domain using PIM which mode assumes that other routers do not want to *** multi *** packets for the group?
E. IGMP snooping
Correct Answer: B
CCNA Composite Exam:Cisco 642-052 CCNAX is the composite exam associated with the Cisco CCNA Routing and Switching certification. Candidates can prepare for this exam by taking the Interconnecting Cisco Networking Devices: Accelerated (CCNAX) course. This exam tests a candidate’s knowledge and skills required to install, operate, and troubleshoot a small to medium size enterprise branch network. The topics include all the areas covered under ICND 1 and ICND2 Exams


Which command line should you use to ****** a port as a trunk port on a Catalyst 3500XL switch?
A. Switch(config)#vtp mode
B. Switch(config)#set trunk
C. Switch(config)#encapsulate
D. Switch(config)#switchport *********-
Correct Answer: D

Catalyst switches support which two methods of assigning members to VLANS? (Choose two.)
A. static VLANs
B. dynamic VLANs
C. automatic VLANs
D. host-based VLANs
E. source-based VLANs
Correct Answer: AB
Which DTP switchport mode parameter sets the switch port actively send and respond ********** frames?
A. access
B. trunk
C. no negotiate
D. dynamic desirable
E. dynamic auto
Correct Answer: D
Which command removes certain VLANs from an existing trunk***?
A. set vlan
B. clear vtp
C. clear port
D. clear trunk
Correct Answer: D
Which statement about static VLANs is true?
A. Devices use DHCP to request their VLAN.
B. Attached devices are unaware of any VLANs.
C. Devices are assigned to VLANs based on their MAC address
D. Devices are in the same VLAN regardless of which **** ***
Correct Answer: B
The telecommunications sector is now highly competitive. New carriers are ____.
A. using cable to complete with DSL
B. creating applications and reporting capabilities to compete with ********
C. using wireless to provide speed and are creating new application they belling will satisfy under demand
D. creating enhanced services to compete with incumbents, and new ***** creating infrastructure so they do not need to outsource to existing operators
Correct Answer: D

What are three valid combinations of trunk modes for ports configured a link parameter (Choose three.)
A. On/On
B. On/Auto
C. Auto/Auto
D. Desirable/Auto
E. Nonegotiate/Desirable
Correct Answer: ABD QUESTION 22

What are the three default port settings in a **** (Choose two.)
A. Each switch port is assigned to a **** VLAN.
B. Dynamic VLANs require *** Membership Policy Server.
C. Devices are in the same VLAN **** of which port they attach to.
D. Dynamic VLAN assign*** are more through the command line interface.
Correct Answer: AD QUESTION 23
Network Services provide hardware-based data compression and ********in the Cisco 7500 series and is done in the _____.
C. services adapters
D. route switch processor

Correct Answer: C QUESTION 24
Which trunking mode prevents DISL or DTP frames from being sent out of a trunk links
A. On
B. Auto
C. Desirable
D. Nonegotiate

Correct Answer: D QUESTION 25
Which two statements about dynamic VLAN are true? (Choose two.)
A. Each switch port is assigned to a **** VLAN.
B. Dynamic VLANs require *** Membership Policy Server.
C. Devices are in the same VLAN ***less of which port they attach to.
D. Dynamic VLAN **** are more through the command line interface.

Correct Answer: BC QUESTION 26
What is the purpose of the Autodetect function of the CRWS tools?
A. to detect the encapsulation of the line whether it is PPPoE, PPPoA, or bridged
B. to detect if the connection is over cable or DSLand to set up the router appropriately
C. to detect if there is a connection, if there a connection to acquire the DHCP information from the carrier
D. to detect if there is a connection and there is a connection to acquire the DHCP information from the carrier and the import that information to the DHCP server for the inside network.

Correct Answer: A QUESTION 27

Get certified Cisco 642-052 is a guaranteed way to succeed with IT careers. We help you do exactly that with our high quality ISC Cisco 642-052 Certification Certified Information Systems Security Professional training materials.