Flydumps provides the guaranteed preparation material to boost up your confidence in 3Com 3M0-600 exam.Successful candidates have provided their reviews about our guaranteed 3Com 3M0-600 preparation material, you can come to realize the real worth of our featured products through overviewing the reviews and testimonials.
QUESTION 21
Match each IEEE 802.11 standard with its description.
A.
B.
C.
D.
Correct Answer:
QUESTION 22
Which IP route service can be configured on 3Com Wireless Switch/Controller (WXs)?
A. Static routes to forward traffic passing through the WX to a specific IP router, if the traffic is not on a local VLAN or subnet
B. Static routes to forward traffic passing through the WX to a specific IP router, if the traffic is on a local VLAN or subnet
C. Static routes to forward traffic generated by the WX to a specific IP router, if the traffic is on a local VLAN or subnet
D. Static routes to forward traffic generated by the WX to a specific IP router, if the traffic is not on a local VLAN or subnet
Correct Answer: D
QUESTION 23
Choose the 3Com product that is represented by Sevice A in the network diagram.
A. 11a/b/g Wireless LAN Workgroup Bridge
B. Wireless LAN Access Point 8750
C. Wireless LAN Switch WX1200
D. Wireless LAN Managed Access Point (MAP) 2750
Correct Answer: A
QUESTION 24
Why should you use PortFast on the Wireless LAN Switch/Controller?
A. It immediately puts a port into the STP forwarding state, preventing an application from possibly timing out
B. It enables Jumbo Frames on the port, providing higher data throughput on the link
C. It configures all the ports for 1,000 Mbps full duplex, providing maximum throughput
D. Like Rapid Spanning Tree Protocol (RSTP), PortFast provides faster convergence for wireless devices when a bridge port goes up or down on the network
Correct Answer: A
QUESTION 25
Choose the two features supported by the 3Com Wireless LAN Managed Access Point (MAP) 2750. (Choose two.)
A. Fit access point
B. IEEE 802.1X Network Login and IPSec
C. Dual-mode radio allows operation for both IEEE 802.11b/g and IEEE 802.11a
D. Dual-mode radio allows operation for either IEEE 802.11b/g or IEEE 802.11a
Correct Answer: AD
QUESTION 26
Any one of the VLAN IP addresses assigned to a Wireless LAN Switch/Controller can be used for its management communications.
A. True
B. False
Correct Answer: A
QUESTION 27
What is the benefit of Inter-Access Point Protocol (IAPP) support on the Wireless LAN Access Point 8xx0 family?
A. It allows simultaneous management of multiple access points
B. It allows users to roam between access points without re-authentication
C. It allows access points to share configuration and forwarding table information
D. It allows the access points to create multiple Virtual Access Points (VAPs) for improved wireless security
Correct Answer: B
QUESTION 28
You have taken a new job as the network administrator. You find a 3Com Wireless LAN Access Point 8750 on a shelf in the network supply closet. What should you do when you are unable to connect a Wireless LAN Access Point 8750 because your predecessor has configured the access point (AP) with an unknown username and password?
A. Reset the AP to its default factory settings by opening the back of the AP and removing the battery for at least 30 seconds
B. Use Windows Registry Editor to create and upload the following text to disable the AP security: “HKEY_USERS\.DEFAULT\Software\3Com Corporation\EAPOL\UserEapInfo”
C. Reset the AP configuration to factory default by pressing the reset button for at least 15 seconds
D. Attach your PC directly to the RJ-45 port on the AP and telnet into the AP
Correct Answer: C QUESTION 29
Which three are features supported on the OfficeConnect ADSL Wireless 11g Firewall Router and the 3Com OfficeConnect Wireless 11g Cable/DSL Router? (Choose three.)
A. Stateful packet inspection
B. 40/64-bit and 128-bit Wired Equivalent Privacy (WEP) encryption
C. VPN termination
D. Four 10/100 Ethernet LAN ports
E. Power over Ethernet (PoE)
F. 256-bit Wi-Fi Protected Access (WPA) encryption
Correct Answer: BDF
QUESTION 30
How does the 3Com Wireless LAN Switch Manager (3WXM) determine the geographic vicinity of a wireless rogue device?
A. By using Global Positioning System (GPS) software
B. By triangulation on multiple Wireless LAN Switches/Controllers
C. By distance from an authorized Managed Access Point (MAP) or triangulation on multiple authorized MAPs
D. By distance from an unauthorized Managed Access Point (MAP)
Correct Answer: C
QUESTION 31
What is the optimal access point (AP) channel allocation configuration on a Wireless LAN (WLAN)?
A. It makes no difference if APs use overlapping or non-overlapping channels
B. Allow APs to automatically perform the hunting process to determine the best channels
C. APs should be configured with different non-overlapping channels
D. APs should be configured with overlapping channels
Correct Answer: C
QUESTION 32
Which statement is true for Wireless LAN (WLAN) data and throughput rates?
A. Data rates on an IEEE 802.11a/g WLAN are not affected by distance from the access point (AP)
B. Data rates drop as the distance to the access point (AP) decreases
C. Data rates drop as the distance to the access point (AP) increases
D. Actual data throughput on a WLAN is about 25% of the defined throughput rate
Correct Answer: C
QUESTION 33
Which two are functions of the 3Com Wireless LAN Switch Manager (3WXM) “deploy” command?
A. Sends a configuration file from 3WXM to a 3Com Managed Access Point (MAP)
B. Sends a configuration file from 3WXM to a 3Com Wireless LAN Switch/Controller
C. Synchronizes configuration information between the 3WXM and a 3Com Wireless LAN Switch/ Controller
D. Allows a Wireless LAN Switch/Controller to be drawn into a Network Plan Mobility Domain
E. Activates a newly loaded configuration file on a 3Com Wireless LAN Switch/Controller
Correct Answer: BC QUESTION 34
Which three are features of the 3Com Wireless LAN Controller WX4400? (Choose three.)
A. External redundant SuperStack RPS
B. Power over Ethernet (PoE)
C. License upgrade to support a maximum of 96 Managed Access Points
D. Stack up to four units together to support a maximum of 144 fit access points
E. Four 1,000 Mbps GBICs or 1000BASE-TX ports
F. Supports up to 24 fit access points with base model
Correct Answer: CEF
QUESTION 35
What is the purpose of the 3Com Wireless LAN Switch Manager?
A. Configure, deploy and manage any 3Com wireless product
B. Configure, deploy and manage 3Com Wireless LAN Mobility Systems, i.e., Wireless LAN Controller WX4400
C. Configure, deploy and manage any wireless product
Correct Answer: B
QUESTION 36
Which two are performed by the 3Com Wireless LAN Switch Manager (3WXM), during the Compute and Place MAPs process of network planning, to determine the number of Managed Access Points (MAPs) for an area? (Choose two.)
A. Optimal MAP transmit power requirements for RF area coverage
B. Capacity calculation to determine the number of MAPs required
C. Coverage calculation to determine RF capacity and coverage
D. Coverage calculation to determine the RF obstacles for an area
Correct Answer: BC
QUESTION 37
Which best describes the 3Com Wireless LAN Controller and/or Switches?
A. Device that centrally controls multiple Managed Access Points (MAPs) using identity-based networking to deliver network services
B. Device that centrally controls and powers multiple Managed Access Points (MAPs) using Microsoft Active Directory user identity to deliver network services
C. Device that centrally controls multiple fat access points (APs) using IEEE 802.1X Network Login user identity to deliver network services
D. Device that centrally controls multiple fat access points (APs) using port-based user identity to deliver network services
Correct Answer: A
QUESTION 38
Which Wireless Infrastructure Device Manager (WIDM) command displays the generic settings of a discovered 3Com Access Point (AP), i.e., device name, type, IP address, MAC address?
A. Show
B. Display
C. Present
D. Properties
Correct Answer: D QUESTION 39
Which two are reasons a company may choose to use a building-to-building wireless bridge versus a T1/E1 or fiber link? (Choose two.)
A. The initial installation costs and/or recurring monthly charges
B. Time to deploy and set up the connection
C. Reliability of the connection
D. The distances between the two buildings
Correct Answer: AB QUESTION 40
Which wireless network functions are supported by the 3Com Wireless LAN Switch Manager (3WXM)?
A. Plan, configure and deploy wireless LAN Mobility System
B. Plan, configure, deploy and manage wireless LAN Mobility System
C. Configure, deploy and manage wireless LAN Mobility System
D. Configure the 3Com Wireless LAN Mobility System
Correct Answer: B QUESTION 41
What is the first step to configuring the Wireless LAN Access Point 8750 after the access point (AP) is powered on and connected to the Ethernet port of a switch configured with VLANs?
A. Ensure the AP and your PC are connected as tagged members of different VLANs and install and launch the Wireless Infrastructure Device Manager software on your PC
B. Connect your laptop PC to the second RJ-45 port on the AP and install and launch the Wireless Infrastructure Device Manager software on your PC
C. Ensure the AP and your PC are both connected to the same VLAN and install and launch the Wireless Infrastructure Device Manager software on your PC
D. Ensure the AP and your PC are both connected as untagged members of different VLANs and install and launch the Wireless Infrastructure Device Manager software on your PC
Correct Answer: C QUESTION 42
Match each IEEE standard with its description.
A.
B.
C.
D.
Correct Answer:
QUESTION 43
What is the System IP address for the 3Com Wireless LAN Switch and/or Controller?
A. It is the first IP address assigned to the wireless switch used exclusively for management communications
B. It is the root IP address of a 3Com Wireless LAN Mobility solution used by all other switch/controllers to establish the wireless network topology
C. It is the IP address assigned to the master or seed switch/controller used to manage the entire Wireless LAN Mobility system
D. It is one of the VLAN IP addresses assigned to a switch/controller used for wireless switch-to-switch communications within a mobility domain
Correct Answer: D QUESTION 44
Which two are features of a Wireless LAN (WLAN) Infrastructure Basic Service Set? (Choose two.)
A. Created when two or more Basic Service Sets are connected together
B. Only stations exist in the service area and no access point (AP) is used
C. Management and control of the service area is performed by the access point (AP)
D. Members communicate directly with each other within the service area
E. Also known as an Ad Hoc or Peer-to-Peer WLAN
Correct Answer: CD
QUESTION 45
What was a limitation of first-generation Wireless LAN (WLAN) products?
A. Were designed to be managed individually
B. Did not support roaming for mobile computers
C. Did not provide authentication or encryption services
D. Were not designed to support large number of users
Correct Answer: A
Flydumps 3Com 3M0-600 exam questions which contain almost 100% correct answers are tested and approved by senior lecturers and experts.The 3Com 3M0-600 – Implementing 3Com 3M0-600 VCE and PDF give you the knowledge and the know how to affectively prepare for the 3Com 3M0-600 that you will be tested on for 3Com 3M0-600 exam.
