Your worries about 3Com 3M0-600 exam complexity no more exist because Flydumps is here to serves as a guide to help you to pass the exam. All the exam questions and answers is the latest and covering each and every aspect of 3Com 3M0-600 exam.It 100% ensure you pass the exam without any doubt.
QUESTION 23
You have taken a new job as the network administrator. You find a 3Com Wireless LAN Access Point 8750 on a shelf in the network supply closet. What should you do when you are unable to connect a Wireless LAN Access Point 8750 because your predecessor has configured the access point (AP) with an unknown username and password?
A. Attach your PC directly to the RJ-45 port on the AP and telnet into the AP
B. Reset the AP configuration to factory default by pressing the reset button for at least 15 seconds
C. Reset the AP to its default factory settings by opening the back of the AP and removing the battery for at least 30 seconds
D. Use Windows Registry Editor to create and upload the following text to disable the AP security: “HKEY_USERS\.DEFAULT\Software\3Com Corporation\EAPOL\UserEapInfo”
Correct Answer: B
QUESTION 24
You have launched the 3Com Wireless Infrastructure Device Manager (WIDM) software to configure your Wireless LAN Access Point 8750. When you see the access point (AP) on your PC screen, it has an exclamation point located to the left of the AP. What is the significance of the exclamation point?
A. The AP is still booting up
B. The AP has had a device failure and is non-operational
C. The AP is configured as a Managed Access Point (MAP)
D. The AP does not have an IP address assigned or is in a different subnet from your PC
Correct Answer: D
QUESTION 25
What is the first step to configuring the Wireless LAN Access Point 8750 after the access point (AP) is powered on and connected to the Ethernet port of a switch configured with VLANs?
A. Connect your laptop PC to the second RJ-45 port on the AP and install and launch the Wireless Infrastructure Device Manager software on your PC
B. Ensure the AP and your PC are both connected to the same VLAN and install and launch the Wireless Infrastructure Device Manager software on your PC
C. Ensure the AP and your PC are connected as tagged members of different VLANs and install and launch the Wireless Infrastructure Device Manager software on your PC
D. Ensure the AP and your PC are both connected as untagged members of different VLANs and install and launch the Wireless Infrastructure Device Manager software on your PC
Correct Answer: B
QUESTION 26
Which parameters must be completed to set up a 3Com access point (AP) as a non-restrictive Virtual Access Point (VAP)?
A. VLAN ID and radio channels
B. Bridging mode and radio channels
C. Service Set ID (SSID) and VLAN ID
D. Service Set ID (SSID) and Wi-Fi settings
E. MAC address and Service Set ID (SSID)
Correct Answer: C
QUESTION 27
What is displayed by the 3Com Launcher/3Com Wireless LAN Manager if the antenna is retracted on a 3Com 11a/b/g Wireless PC Card with XJACK Antenna?
A. A picture with a red line connecting the PC and AP
B. A picture with a green line connecting the PC and AP
C. A picture with a yellow line connecting the PC and AP
D. A picture with multiple curved lines showing the single strength between the PC and AP
Correct Answer: A
QUESTION 28
Which best describes the 3Com Wireless LAN Controller and/or Switches?
A. Device that centrally controls multiple fat access points (APs) using port-based user identity to deliver network services
B. Device that centrally controls multiple Managed Access Points (MAPs) using identity-based networking to deliver network services
C. Device that centrally controls multiple fat access points (APs) using IEEE 802.1X Network Login user identity to deliver network services
D. Device that centrally controls and powers multiple Managed Access Points (MAPs) using Microsoft Active Directory user identity to deliver network services
Correct Answer: B
QUESTION 29
Which three are benefits of the 3Com Wireless LAN Mobility System? (Choose three.)
A. Enhances user and group security with security profiles
B. Eliminates the need to install access points (APs) throughout the building
C. Provides centralized management for wireless controllers/switches and Managed Access Points
D. Improves throughput of critical data with multiple priority queues and queuing algorithms on each wireless controller/switch
E. Automates access point (AP) management, i.e., adjusts traffic loads, optimizes AP power, changes AP channel assignments
Correct Answer: ACE
QUESTION 30
The 3Com Wireless LAN Controller WX4400 provides high-bandwidth, centralized control for up to 144 directly attached managed access points (MAPs).
A. True
B. False
Correct Answer: B
QUESTION 31
Which best describes the features of the 3Com Wireless LAN Switch WX1200?
A. Centrally manages/controls up to six Managed Access Points (MAPs), improving security and management
B. Centrally manages/controls up to 12 Managed Access Points (MAPs), improving security and management
C. Centrally manages/controls up to 24 Managed Access Points (MAPs), improving security and management
D. Centrally manages/controls up to 12 Managed Access Points (MAPs), improving wireless roaming, security and management
E. Centrally manages/controls up to 24 Managed Access Points (MAPs), improving wireless roaming, security and management
Correct Answer: D
QUESTION 32
What is required before the network administer can connect to a 3Com Wireless LAN Switch/Controller via telnet?
A. Create a user/password on the device and set the console port authentication
B. Assign a master password to the device and set the console port authentication
C. Enable telnet services, create an admin user/password on the device and assign the device an IP address
D. Enable privilege mode, create a user/password on the device and set the console port authentication
Correct Answer: C
QUESTION 33
What is the System IP address for the 3Com Wireless LAN Switch and/or Controller?
A. It is the first IP address assigned to the wireless switch used exclusively for management communications
B. It is the IP address assigned to the master or seed switch/controller used to manage the entire Wireless LAN Mobility system
C. It is one of the VLAN IP addresses assigned to a switch/controller used for wireless switch-to-switch communications within a mobility domain
D. It is the root IP address of a 3Com Wireless LAN Mobility solution used by all other switch/controllers to establish the wireless network topology
Correct Answer: C
QUESTION 34
Which three are 3Com Wireless LAN Switch Manager (3WXM) network planning functions? (Choose three.)
A. Generate a work order
B. Define the geographical area for the wireless network
C. Launch countermeasures against rogue access points
D. Define the RF model and the coverage areas for the floor
E. Define the connection speeds for wired devices on a floor
Correct Answer: ABD
QUESTION 35
Which RF obstacle-planning functions are supported by the 3Com Wireless LAN Switch Manager (3WXM)?
A. Remove unnecessary layers from imported JPEG floor plans
B. Assign an attenuation factor to all objects from an imported GIF floor plan
C. Assign an attenuation factor to all objects from an imported JPEG floor plan
D. Create objects that may absorb RF signals and assign each object an attenuation factor
Correct Answer: D
QUESTION 36
The network administrator can draw or import a JPEG or AutoCAD building floor plan using the 3Com Wireless LAN Switch Manager (3WXM).
A. True
B. False
Correct Answer: A
QUESTION 37
Which two are performed by the 3Com Wireless LAN Switch Manager (3WXM), during the Compute and Place MAPs process of network planning, to determine the number of Managed Access Points (MAPs) for an area? (Choose two.)
A. Coverage calculation to determine RF capacity and coverage
B. Capacity calculation to determine the number of MAPs required
C. Coverage calculation to determine the RF obstacles for an area
D. Optimal MAP transmit power requirements for RF area coverage
Correct Answer: AB QUESTION 38
Which best describes the information provided with the 3Com Wireless LAN Switch Manager (3WXM) work order?
A. Information for the physical installation of Managed Access Points (MAPs)
B. Information for the physical installation of the 3Com Wireless LAN Mobility System
C. Information for the physical installation and software parameters, i.e., IP addresses, VLANs, channel assignments, etc., of Managed Access Points (MAPs)
D. Information for the physical installation of Managed Access Points (MAPs), 3Com Wireless LAN Controller/Switch initial setup configuration information and projected RSSI information of the 3Com Wireless LAN Mobility System
Correct Answer: D
QUESTION 39
Which two are functions of the 3Com Wireless LAN Switch Manager (3WXM) “deploy” command?
A. Sends a configuration file from 3WXM to a 3Com Managed Access Point (MAP)
B. Sends a configuration file from 3WXM to a 3Com Wireless LAN Switch/Controller
C. Activates a newly loaded configuration file on a 3Com Wireless LAN Switch/Controller
D. Allows a Wireless LAN Switch/Controller to be drawn into a Network Plan Mobility Domain
E. Synchronizes configuration information between the 3WXM and a 3Com Wireless LAN Switch/ Controller
Correct Answer: BE QUESTION 40
Which three types of wireless devices may be detected as rogues by the 3Com Wireless LAN Switch Manager (3WXM)? (Choose three.)
A. Authorized wireless NIC
B. Wireless NIC running in ad-hoc mode
C. Unauthorized third-party access point
D. Unauthorized 3Com Wireless LAN Switch/Controller
E. Unauthorized 3Com access point (AP)
Correct Answer: BCE QUESTION 41
Try 3Com 3M0-600 exam free demo before you decide to buy it in Flydumps.After you buy Flydumps 3Com 3M0-600 exam dumps, you will get free update for ONE YEAR!
