Cisco 642-618

,

There is No need to hassle if you are stuck in the Cisco 642-618 exam difficulties,Flydumps will assist you right through exam specific preparation material.Flydumps delivers the most comprehensive preparation material,covering each and every aspect of Cisco 642-618 exam curriculum.

QUESTION 80
Which access rule is disabled automatically after the global access list has been defined and applied?
A. the implicit global deny ip any any access rule
B. the implicit interface access rule that permits all IP traffic from high security level to low security level interfaces
C. the implicit global access rule that permits all IP traffic from high security level to low security level interfaces
D. the implicit deny ip any any rule on the global and interface access lists
E. the implicit permit all IP traffic from high security level to low security level access rule on the global and interface access lists

Correct Answer: B Section: Section8 (71-80) Explanation
Explanation/Reference:
Explanation:
QUESTION 81
Which option can cause the interactive setup script not to work on a Cisco ASA 5520 appliance running software version 8.4.1?

 » Read more about: Cisco 642-618 Preparation Materials, The Most Recommended Cisco 642-618 Study Guides Online Shop  »

,

We are committed on providing you with the latest and most Cisco 642-618 exam preparation products.If you want to pass Cisco 642-618 exam successfully, do not miss to read latest Cisco 642-618 on Flydumps.

QUESTION 86
Which option lists the main tasks in the correct order to configure a new Layer 3 and 4 inspection policy on the Cisco ASA appliance using the Cisco ASDM Configuration > Firewall > Service Policy Rules pane?
A. 1. Create a class map to identify which traffic to match.
2.
Create a policy map and apply action(s) to the traffic class(es).

3.
Apply the policy map to an interface or globally using a service policy.
B. 1. Create a service policy rule.
2.

 » Read more about: Cisco 642-618 Certification Material, 100% Pass Rate Cisco 642-618 Exam Guide Will Be More Popular  »

,

The 100% valid latest Cisco 642-618 question answers ensure you 100% pass! And now we are offering the free Cisco 642-618 new version along with the VCE format Cisco 642-618 practice test. Free download more newCisco 642-618 PDF and VCE on Flydumps.com.

QUESTION 65
Which flags should the show conn command normally show after a TCP connection has successfully been established from an inside host to an outside host?
A. aB
B. saA
C. sIO
D. AIO
E. UIO
F. F

Correct Answer: E Section: Section7 (61-70) Explanation
Explanation/Reference:
Explanation:
QUESTION 66
Which Cisco ASA show command groups the xlates and connections information together in itsoutput?

 » Read more about: Cisco 642-618 Real Testing, The Most Effective Cisco 642-618 Exam Questions Vce Are Based On The Real Exam  »

,

The Cisco contains more than 400 practice questions for the Cisco 642-618 exams,including simulation-based questions.Also contains hands-on exercises and a customized copy of the Cisco 642-618 exams network simulation software.

QUESTION 51
On Cisco ASA Software Version 8.4.1 and later, which three EtherChannel modes are supported? (Choose three.)
A. active mode, which initiates LACP negotiation
B. passive mode, which responds to LACP negotiation from the peer
C. auto mode, which automatically responds to either PAgP or LACP negotiation from the peer
D. on mode, which enables static port-channel mode
E. off mode, which disables dynamic negotiation

Correct Answer: ABD Section: (none) Explanation
Explanation/Reference:
Explanation:
QUESTION 52
On Cisco ASA Software Version 8.4 and later, which two options show the maximum number of active and standby ports that an EtherChannel can have? (Choose two.)
A. 2 active ports
B. 4 active ports
C. 6 active ports
D. 8 active ports
E. 2 standby ports
F. 4 standby ports
G. 6 standby ports
H. 8 standby ports

Correct Answer: DH Section: (none) Explanation
Explanation/Reference:
Explanation:
QUESTION 53
Which additional active/standby failover feature was introduced in Cisco ASA Software Version 8.4?

 » Read more about: Cisco 642-618 Certification Exam, Buy Discount Cisco 642-618 Practice With The Knowledge And Skills  »

,

New VCE and PDF– If you want to pass Cisco 642-618 exam successfully,do not miss to test Cisco latest Cisco 642-618 brain dumps.All Cisco 642-618 the new questions and answers were timely added, visit Flydumps.com to free download VCE player and PDF files.

QUESTION 1
On the Cisco ASA, tcp-map can be applied to a traffic class using which MPF CLI configuration command?
A. nspect
B. sysopt connection
C. tcp-options
D. parameters
E. set connection advanced-options

Correct Answer: E Section: (none) Explanation
Explanation/Reference:
QUESTION 2
By default, which traffic can pass through a Cisco ASA that is operating in transparent mode without explicitly allowing it using an ACL?

 » Read more about: Free Download Of Cisco 642-618 VCE And PDF Dumps For Groundbreaking Results  »

,

Important Info — Cisco 642-618 new study guide are designed to help you pass the exam in a short time.Everything you need can be found in the new version Cisco 642-618 exam dumps.Visit Flydumps.com to get more valid information.

Exam A
QUESTION 1
Where in the Cisco ASA appliance CLI are Active/Active Failover configuration parameters configured?
A. admin context
B. customer context
C. system execution space
D. within the system execution space and admin context
E. within each customer context and admin context
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 2
With Cisco ASA active/active or active/standby stateful failover, which state information or table is not passed between the active and standby Cisco ASA by default?

 » Read more about: 2016 Latest Cisco 642-618 Exam Questions 100% Pass Gurantee  »

,

100% Valid And Pass With latest Cisco 642-618 exam dumps, you will never fail your Cisco 642-618 exam. All the questions and answers are updated and added to the new version timely by our experts.Also now Cisco 642-618 is offering free Cisco 642-618 exam VCE player and PDF files for free on their website.

Exam A
QUESTION 1
On the Cisco ASA, tcp-map can be applied to a traffic class using which MPF CLI configuration command?
A. inspect
B. sysopt connection
C. tcp-options
D. parameters
E. set connection advanced-options
Correct Answer: E Section: Section1 (1-10) Explanation
Explanation/Reference:
Explanation:
QUESTION 2
By default, which traffic can pass through a Cisco ASA that is operating in transparent mode without explicitly allowing it using an ACL?

 » Read more about: New Questions-100% Valid New Updated Questions for Cisco 642-618 New Dumps  »